Welcome to Our Armory Site -Home for Advanced Teching! Global Shipping Delivered to Your Doorstep! We Strive to Ship Within 48 Hours of Ordering!
Moneda

Advanced Inner Barrel Stabilizing O-Ring for: Maxx Model Rotary Chamber (New Gen. All)

$9.99
Proveedor Airtech Studios

Product Description

The Advanced locking ring is designed to replace the current Maxx O-ring (Normally brass) ring at the end of setting up the hop unit, however, with the original, there is a tendency for a wobbly gap in between the components which would tilt the barrel at an angle.

Once the new stabilizing ring is installed, it will ensure a snug fit to restrict the motion of the barrel that is inside the hop-up chamber. It will secure the inner barrel and maintain itself steadily locked in the true horizontal position. Even when shots are fired, which is the moment where there is the most stress and vibration at the hop-up, the O-ring will ensure the structure is intact.

This in turn will create a dependable system for the BB to travel down the barrel undisturbed for the most consistent and accurate shots.

Core Benefits After Install

  • Increase shooting accuracy and consistency.
  • Eliminated moving factor between the inner barrel and hop-up unit.
  • Strong polymer fibre glass construction -eliminate any shrinkage and expansion compared to standard brass rings cause by weather temperature.

Compatible for all New Gen Maxx Model Hop-up Chambers including:

✔ M4A
✔ M4E & M4Ei
✔ M4G & M4Gi
✔ M4i
✔ M4P
✔ M4W
✔ MGW
✔ MXW 

Package Contents
1 x Inner Barrel Locking Ring
5 x Silicone Installation Rings

Full step-by-step installation can be downloaded using this link CLICK HERE TO DOWNLOAD

FAQ Frequently Asked Questions

1. Is this difficult to install?

We recommend that you have some experience with R-hop builds before attempting and please download the instruction/ Installation manual before installing. Consult a gun tech for help if needed or contact us for any help.

2. Do I need an R-HOP patch?

Yes, you do or Flat-hop. There are many brands of R-hop in the market, much like Psionic, and Silent sniper that is easily available in the market as a drop-in patch. Alternatively, there are bucking available from companies like Maple Leaf with their macaroon buckings that perform much like a standard R-HOP does.

3. Should I upgrade my inner barrel?

It's not necessary as stock barrels are pretty good quality these days and could still function well with the R-HOP builds.

4. How do you remove the bracket?

It is possible, but not recommended once it is glued into place to prevent further deviations of the setup in the future. It is possible to still service your hop-up chamber and its components for cleaning without removing the TDC converter bracket.

5. Can it work on another hop-up chamber?

No. This is designed specifically for the Tokyo Marui NGRS (M4 Platform only). We have other brackets for Krytac, Prowin, KWA, ICS, and VFC.

6. What bucking would be the best?

The stock Tokyo Marui ones are good, but other brands like Prometheus and Modify brands have boundless buckings (without the bump inside) which are required for R-HOP builds.

7. Will this work for Flat-hop?

Yes, it will, and for G-hop too. There are plenty of videos of how-to and what you need for this setup. Once you have this in place, you will notice a huge difference in performance and accuracy.

8. How far can R-HOP travel?

For a 1J setup and the right settings, 60-70m using 0.28g BB

*Please note the Tokyo Marui hop-up chamber is not included - this is a specific TDC upgrade made FOR the existing Toyko Marui NGRS Chamber*